压滤机专用泵的使用以及维护。压滤机专用泵使用:
1、开车前应将泵内灌满须保送的液体（如泵是吸上的状况），关闭出口闸阀，接好电源。
2、接通电源，检查泵的转向能否正确。
3、机组试运转5-10分钟，如无异常现象可投入运转。
4、停机时，应先将出口的闸阀关闭，然后再切断电源。
压滤机专用泵维护和颐养：
1、定期检查泵和电机，改换易损零件。
2、长期停机不用时，应清洗泵内流道并切断电源。
3、严禁空运转。
Application:
1. Before start-up, fill the pump with the liquid to be guaranteed (if the pump is in suction condition), close the outlet gate valve and connect the power supply.
2. Turn on the power supply and check whether the steering of the pump is correct.
3. Test run the unit for 5-10 minutes, and put it into operation if there is no abnormal phenomenon.
4. Shut down the gate valve at the outlet before cutting off the power supply.
Maintenance and maintenance:
1. Check the pump and motor regularly and replace the vulnerable parts.
2. When the pump is shut down for a long time, clean the flow passage in the pump and cut off the power supply.
3. No idling.
